to:matthew.tezyk@enron.com means Matthew Tezyk (matthew.tezyk@enron.com).
-
21 Nov 2001
Kevin Jolly to Chip Schneider, W. David Duran, Mark Frevert and 32 more
Turbine Position Report 11/16/01
Please contact Chip Schneider at x3-1789 or Kevin Jolly at x5-7147 if you have any questions.
-
7 Nov 2001
Becky Caudle to Chip Schneider, W. David Duran, Mark Frevert and 33 more
Turbine Position Report 11/2/01
Please contact Chip Schneider at x3-1789 or Becky Caudle at x3-9749 if you have any questions.
-
9 Oct 2001
Becky Caudle to Chip Schneider, W. David Duran, Mark Frevert and 34 more
REVISED - Turbine Position Report
Sorry for the inconvenience. The 10/5/01 Turbine Position Report had a minor revision after distribution. The revised report is attached. Please call Becky Caudle at 3-97…
-
26 Sep 2001
Kevin Jolly to Chip Schneider, W. David Duran, Mark Frevert and 32 more
Turbine Position Report 9/21/01
Please contact Chip Schneider at x3-1789 or Kevin Jolly at x5-7147 if you have any questions.
-
10 Sep 2001
Kevin Jolly to Chip Schneider, W. David Duran, Mark Frevert and 33 more
Turbine Position Report 9/7/01
Please contact Chip Schneider at x3-1789 or Kevin Jolly at x5-7147 if you have any questions.
-
31 May 2001
Kevin Jolly to Chip Schneider, W. David Duran, Mark Frevert and 29 more
Turbine Position Report 5/31/01
Please contact Chip Schneider at x3-1789 or Kevin Jolly at x5-7147 if you have any questions.
-
25 May 2001
Frank Hosak to Mike Coleman and 14 more
RE: Fuel Oil Ash Spec Revision of Contract Exhibit A
Mike, in going over Contract Exhibit A to revise the Ash Content in Section 4, Fuel Oil Specification, I ran across a note in my work file from an April 18 e-mail respons…
-
24 May 2001
Mike Coleman to V. Charles Weldon, Matthew Tezyk and 18 more
RE: Fuel Oil Ash Spec
Charlie, Based on your response, copied below, on the ash content of the fuel required, and MHI's response, also copied below, identifying the ash limits to meet PM10 spe…
-
21 May 2001
V. Charles Weldon to Mike Coleman, Matthew Tezyk and 16 more
RE: Fuel Oil Ash Spec
Mike, The maximum ash content is 0.01 wt% on the official spec for low-sulfur #2 fuel oil that we would be ordering. We should plan on receiving fuel oil with up to this …
-
21 May 2001
Mike Coleman to V. Charles Weldon, Matthew Tezyk and 16 more
Fuel Oil Ash Spec
Can you tell me what the lowest reasonable ash content readily available is? We will submit the lowest reasonably attainable spec to MHI and ask them to assure that they …
-
21 May 2001
Mike Coleman to V. Charles Weldon, Matthew Tezyk and 18 more
RE: Fuel Oil Vanadium Spec
I believe we probably have a miscommunication here. I think somewhere we've mistaken 0.05% by weight with 0.05 ppm. Vanadium is a heavy metal that falls out in the residu…
-
18 May 2001
V. Charles Weldon to Matthew Tezyk, Mike Coleman and 8 more
Fuel Oil Vanadium Spec
As I previously shared, the result for vandium in the low-sulfer diesel (#2 fuel oil) came back at <0.1 ppm versus the "spec" of <0.05 ppm. I just talked to the lab super…
-
17 May 2001
Kevin Jolly to Chip Schneider, W. David Duran, Mark Frevert and 29 more
Turbine Position Report 5/18/01
Please contact Chip Schneider at x3-1789 or Kevin Jolly at x5-7147 if you have any questions.
-
16 May 2001
V Charles Weldon to Matthew Tezyk, Mike Coleman, Mark Breese
Re: Fuel Oil Sample
The following response from Doug is intended to address the issue of whether or not the sample taken was representative of what we would expect to recieve in Florida.....…
-
16 May 2001
V Charles Weldon to Matthew Tezyk, Mike Coleman, Mark Breese
Re: Fuel Oil Sample
Our "spec" is <.05 ppm. I talked to Doug about whether or not the measurement can be made to a greater degree of accuracy. We believe it is not but Doug said he would pro…
-
10 May 2001
V Charles Weldon to Matthew Tezyk, Mike Coleman and 2 more
Re: Fuel Specification Requirements
---------------------- Forwarded by V Charles Weldon/HOU/ECT on 05/10/2001 08:38 AM --------------------------- From: Marc De La Roche 05/10/2001 07:39 AM To: Doug Leach/…
-
10 May 2001
V Charles Weldon to Matthew Tezyk and 10 more
Re: Fuel Specification Requirements
Matt, Thank you very much for the info. I have forwarded the specs on to Doug Leach who will be responsible for ordering the fuel oil. I asked him to identify any spec pa…
-
1 May 2001
John G Rigby to Kay Mann, Ben Jacoby and 6 more
LM6000 24 pack Storage Letter- copy please.
Ben and Kay Project is Eletrobolt. ESA has had GE send the stacks for the Electrobolt LM6000 back to Braden for modifications necessary for Eletrobolt and there are a cou…
-
24 Apr 2001
Kevin Jolly to Chip Schneider, W David Duran, Mark Frevert and 28 more
Turbine Position Report 4/20/01
Please contact Chip Schneider at x3-1789 or Kevin Jolly at x5-7147 if you have any questions.
-
3 Apr 2001
Larry Bishop to Ben Jacoby, Kay Mann, Mike Coleman and 9 more
Ft. Pierce EPC Term Sheet
Attached is a VERY PRELIMINARY draft of the EPC Term Sheet for review and comment. It has a lot of hole's, and needs to be read in that light. I will give it more time an…
-
29 Mar 2001
James P Studdert to Ron Tapscott, Eric Booth, jim.sutherland@enron.com and 10 more
Damage to SWPC Generator shipped per INDUSTRIAL BRIDGE
Please see the information below received from the broker. As I indicated from the very beginning, this possibility has always existed. When received, I will distribute a…
-
24 Mar 2001
Kevin Jolly to John J Lavorato, Mark Frevert, W David Duran and 26 more
3/23/01 Turbine Position Report
Please call Chip Schneider at 3-1789 or Kevin Jolly at 5-7147 if you have any questions.
-
23 Mar 2001
Brian D Barto to Ben Jacoby, Kay Mann, Chris Booth and 3 more
Blue Dog Max (GE 7EA) storage invoice and Change Order
Please advise how to respond to GE. Kay has the change order for final review and approval, and Jody Pierce's group has the invoice.
-
1 Mar 2001
Renee Alfaro to Kay Mann, Brian D Barto and 6 more
Blue Dog Change Order 1 rev 8
Please find attached a copy of the latest revision of Change Order 1 to the Blue Dog contract with GE. The attached letter from Jeff Darst is now gone, but GE is insistin…
-
14 Feb 2001
Eric Booth to Renee Alfaro and 2 more
Re: Blue Dog Max, comments on draft CO # 1
Renee- I understand your need to incorporate the actual changes into the change order itself as opposed to an attachment. After reading GE's (Jeff Darst's) document, I ca…