14 Aug 2001, 15:01 UTC
FW: Nville #1 Parameters
- From
- Garry D. Wilson d..wilson@enron.com
- To
- Gerald Nemec
- Date
- Tue, 14 Aug 2001 08:01:24 -0700 (PDT)
Gerald, FYI' gdw
Quoted or forwarded from earlier messages
-----Original Message----- From: Wilson, Garry D. Sent: Monday, August 13, 2001 10:58 AM To: Morgan, Robert D. Cc: Owen, David Subject: FW: Nville #1 Parameters Robert, Attached are Harry's calculated volumes for the Napoleonville Storage #1 well. The 107 degree temperature is the equilibrium temperature of the salt and was obtained from the temperature log conducted after the drilling of the well. gdw -----Original Message----- From: "Allison, Harry" <Allison@pbworld.com>@ENRON [mailto:IMCEANOTES-+22Allison+2C+20Harry+22+20+3CAllison+40pbworld+2Ecom+3E+40ENRON@ENRON.com] Sent: Monday, August 13, 2001 10:36 AM To: Wilson, Garry D. Cc: Owen, David; Tom Hogue (E-mail) Subject: RE: Nville #1 Parameters Garry, The following information is in response to Mr. Morgan's questions, please froward to Robert after your review and agreement. Cavern Volume = 15,116,914 BBLs Min. W.H. Pressure = 577 psig (based on 0.30 psi/ft gradient @ the casing shoe) Max. W.H. Pressure = 1626 psig (based on 0.85 psi/ft gradient @ the casing shoe) This pressure will be exceeded at the very end of dewatering to push the brine back to surface, it is calculated that the pressure to finish dewatering will be 1631 psig (w/ 65 psig of brine system back pressure). Pad (Base)Gas = 3.53 BCF @107 deg F Working Gas = 7.4 BCF @107 deg F Total Gas = 10.93 BCF @107 deg F The well diagram can be found in the Permit Application in Section 4. Thanks, Harry -----Original Message----- From: Morgan, Robert D. [mailto:Robert.D.Morgan@ENRON.com] Sent: Monday, July 23, 2001 4:59 PM To: Allison, Harry Subject: Nville #1 Parameters Please start the dewatering process on July 30th. To prepare from my end, I need some information: Large table showing dewatering progress by day Curve showing max gas injections vs day Cavern parameters Spacial Volume in barrels Min wellhead pressure (0.30gradient) Max wellhead pressure (0.85gradient) Pad gas - Bcf at what temperature Working Gas - Bcf at what temperature Well diagram showing tubulars and dia/depth of hanging string I would like these Tuesday pm, so I can share them with others before I leave for vacation. Thanks.