Enron email

Algorithmic Indexing

13 Nov 2000, 14:25 UTC

NWP System Notice - 01-162 Soliciting Electronic Bids 11/13/

From
Marvin L Stevens marvin.l.stevens@williams.com
To
abenton@utilicorp.com, agcdu1@triax.com, agcdu6@triax.com, anita.reubens@swgas.com, bblanar@coral-energy.com, bob.mattice@engageenergy.com, bruce.langmade@fortjamesmail.com, bymank@wdni.com, cards@wdni.com, cmcgra@puget.com, cridin@puget.com, dave.dungan@weyerhaeuser.com
and 35 more deborahs@kimballenergy.com, derek.danyliw@husky-oil.com, dlh@nwnatural.com, fermis@enron.com, gacynth_adam@transcanada.com, geek@bp.com, gilesmh@bp.com, janderson@clarkpud.com, jennifer_owen@pgn.com, jmmcarthur@duke-energy.com, jsanders@clarkpud.com, kims@kimballenergy.com, klambe@puget.com, kri.pam@pdg.net, llightfoot@coral-energy.com, lmanis@sdge.com, lprior@enron.com, niels_a_vervloet@reliantenergy.com, ramperms@bp.com, rfm@nwnatural.com, robert.harp@engageenergy.com, rony@panalberta.com, Ryan Watt, sbrewer@enron.com, sghill@bcgas.com, sgwi@dynegy.com, spjutd2@wdni.com, ssouth@enron.com, Stephane Brodeur, tdizona@coral-energy.com, tgilliam@avistaenergy.com, tom.mckay@engageenergy.com, val_yildirok@pgn.com, wharlan@ix.netcom.com, zcourns@national-fuel.com
Date
Mon, 13 Nov 2000 06:25:00 -0800 (PST)
Post Date: November 13, 2000 
Category: SHORT-TERM FIRM CAPACITY 
Subcategory: NWP OFFERS 
Subject: 01-162 Soliciting Electronic Bids 11/13/ 

Notice Text: 

All Shippers Notification: 01-162?????? ??????? ??????? Dated November 13, 
2000 



TO:???? ALL SHIPPERS 

FROM:??????????? Candace C. Karpakis- (801) 584-6996 wk 
?????????????????????????????????????????????????????????????? (801) 971-5983 
cellular????????????????????????????? 
?????????????????????? Williams Gas Pipeline-West 
?????????????????????? Northwest Pipeline Transportation 

SUBJECT:??????? SOLICITING ELECTRONIC BIDS FOR AVAILABLE FIRM MAINLINE 
??????? ??????? TRANSPORTATION CAPACITY ON NORTHWEST'S TRANSMISSION SYSTEM 

Northwest has posted the following package of available firm TF-1 Large 
Customer transportation capacity to its Electronic Bulletin Board ("EBB") 
for competitive bid pursuant to the "Right-of-First-Refusal; Posting of 
Pipeline Capacity" provision of Northwest's Tariff, which requires 
availability of capacity to be posted to the EBB subject to bid.? All 
prearranged terms are indicated below, if applicable.? The prearranged 
shipper has the right to match the highest economic value at the end of 
the bid period.? If the prearranged shipper does not match the highest 
economic value, award of such capacity will be made according to 
Northwest's tariff. 

NOTE:? BIDS FOR POSTED CAPACITY WILL BE CONDUCTED ELECTRONICALLY AS CLOSED 
BIDS ON NORTHWEST PIPELINE'S EBB.? Please contact Candace Karpakis or your 
Marketing Services Representative if you encounter any problems with your 
EBB bid(s).? DON'T WAIT UNTIL THE LAST MINUTE TO POST YOUR BID.? Time 
deadlines are electronically monitored and implemented. 


PACKAGE "Q" 
From the October 31, 2000 Posting 
EBB OFFER # 443 

RECEIPT ??? DELIVERY??? ?? TOTAL??????? INITIAL PRIMARY PREARRANGED 
?POINT? ??? POINT ????? ?? DTH/D???????? CONTRACT TERM? ?? OFFER?? 

Shute Creek Ignacio??????? 5,000????? 12/01/00 - 10/31/01?????? ??? YES 
??????????? Bondad-EPNG 

Min. Acceptable Bid:??? $0.12 per Dth of daily Reservation Contract Demand 
for Flexible??????????????????????????????????????????????? Receipt/Delivery 
Point Rights

Min. Acceptable Bid Vol:??????? 1 Dth/d 
Max. Acceptable Bid Vol:??????? 5,000 Dth/d 
Bid Open Date:? 11/13/00 - (2:00 pm Central Time) 
Bid Close Date: 11/15/00 - (2:00 pm Central Time) 
Award Deadline: 11/15/00 - (3:00 pm Central Time) 
Evergreen:????? ??????? Month to Month, Ten (10) Business Day Prior 
Notification 
Special Terms & Cond:?? See 1, 2 and 3 Below. 

SPECIAL TERMS AND CONDITIONS 

1. The discount rate shall apply to points utilized by the original shipper 
entering into 
the transportation agreement with Northwest. 

2. A shipper will be allowed to release and/or segment and release the 
capacity and 
shipper and replacement shipper may utilize any available points on 
Northwest's 
transmission system without impacting the discount for the original shipper. 

3. This prearranged offer is for a reservation contract demand rate.? In 
addition to the 
Reservation Charge Bid, shipper will pay the volumetric charge, the 
applicable 
surcharges and fuel. 
? 

PROCEDURE FOR BIDDING FOR 
AVAILABLE TRANSPORTATION CAPACITY 

The following guidelines will be adhered to for all posted packages of 
transportation 
capacity for electronic bid ("package or packages"): 

1. Shipper must submit a separate electronic bid for each package of 
available 
transportation capacity.? Multiple electronic bid(s) can be submitted for the 
total 
available transportation capacity under the specified package OR multiple 
rates can be 
submitted each for a partial amount of available transportation capacity 
under the 
specified package.? If the same Shipper submits multiple bids, the highest 
present value 
for such package of available transportation capacity shall be considered the 
valid bid. 
All other bids from the same Shipper for the same package of transportation 
capacity will 
be discarded. 

2. Northwest awards bids based on a net present value calculation.? If bid 
rate is less than 
??????? minimum tariff rate, the following formula is utilized:? Bid Rate x 
FERC Interest Rate 
??????? x The Maximum Bid Quantity x 365 days/100/12; or if the maximum rate 
is bid, the 
??????? following formula is utilized:? Bid Rate x FERC Interest Rate x 
Maximum Bid Quantity x 
??????? days bid/100. In case of a tie, each tied shipper will have the right 
to improve its bid 
??????? by submitting an improved bid within 24 hours of the bid close time.? 
Such improved bid 
??????? shall be faxed to (801) 584-7076 to Candace Karpakis or Patrick 
Aman.? If a tie still 
??????? exists, such capacity shall be awarded on a prorata basis. 

3. Northwest will not accept bids with a primary contract term (Term) longer 
than 
??????? indicated?????? for the capacity unless maximum rate is bid. 

INSTRUCTIONS FOR CREATING A BID FOR 
NORTHWEST'S FIRM CAPACITY RELEASE OFFERS 

1. Select "CAPACITY RELEASE" application in Northwest Passage. 
2. Select "CREATE/SUB BID FOR NWP CAP" application.? All current offers will 
appear. 
3. Highlight the offer you are interested in by clicking the left mouse 
button on the offer. 
4. Select the "TERMS & COND" button at the top of the screen, which is now 
active.? The 
screen will allow you to review the conditions of the offer.? Close this 
screen when 
you have finished reviewing. 
5. At this point you can review current bids posted for this offer by 
selecting the "VIEW BID" button.? Close this screen when you have finished 
viewing.

6. If you would like to create a bid for this offer, select "CREATE BID" 
button. 
7. If you want to bid the maximum rate for the capacity, select the "BID MAX 
RATE" button. 
8. Highlight the "END DATE" if you want to modify the end date of the term of 
your offer. 
If you want to modify the receipt/delivery point maximum and minimum volume, 
highlight the receipt/delivery point section with the left mouse button and 
modify accordingly.

9. Select "SAVE".? If an error appears at the button of the screen, the error 
will need 
10. to be corrected and the data will need to be saved again.? If successful, 
a message 
11. will appear indicating the bid information has saved and the bid rate 
must be entered. 
12.? Select "OK". 
13. Select the "RATE" button.? Enter the bid rate.? Select "SAVE". 

You have just "CREATED" your bid for the offer.? You now need to "SUBMIT" 
your bid as follows: 

14. Close out of all screens and return to the "CAPACITY RELEASE" menu 
screens. 

15. To Submit or Review your bid(s), select the "REV/SUB/WDRW NWP CAP BID" 
button.? All 
of your bids will appear.? Highlight the "BID IN DRAFT STATUS" that you would 
like 
to submit.? Select the "SUBMIT" button at the top of the screen to post the 
bid. 

To Withdraw your bid(s), select the "REV/SUB/WDRW NWP CAP" button.? All of 
your bids will appear.? If the bid has not yet been submitted, highlight the 
"BID IN DRAFT STATUS" that you would like to withdraw.? Select the "WITHDRAW" 
button at the top of the screen to withdraw the bid.? After a bid has been 
withdrawn, you can select the "DELETE" button at the top of the screen to 
delete it from the screen. 
NOTE:? After each selection, always "REFRESH" the screen to get the latest 
status. 

Word: F\Short Term/Capacity for Bid-All 2000 November 13, 2000 01-162.doc 
WGP-W 
dap/cc