Enron email

Algorithmic Indexing

27 Feb 2001, 13:29 UTC

Load Analysis

From
Phil DeMoes phil.demoes@enron.com
To
John Hodge
Date
Tue, 27 Feb 2001 05:29:00 -0800 (PST)
Here is comments from Brad on his initial assessment of Tennergy.  He is 
working with Williams now to see if his flow analysis is accurate.  We should 
know from Williams shortly and therefore will need to get a handle on how 
much additional transport we will need.
Quoted or forwarded from earlier messages
---------------------- Forwarded by Phil DeMoes/Corp/Enron on 02/27/2001 
01:27 PM ---------------------------
   
	
	
	From:  Brad Blevins @ ECT                           11/29/2000 06:42 PM
	

To: Phil DeMoes/Corp/Enron@ENRON
cc:  

Subject: Load Analysis  

From the best that I can tell from a GE LM600 catalog, the fuel rate for one 
of these units under average conditions will be 8.4 MMCFD.  The capacity of 
these two 8" lines is between 40-44 MMCFD, but the LDC load number peaks up 
to 25 MMCFD in September.  If you look at just June, July and August, then 
it's still 22 MMCFD.  If the fuel rates from the catalog are correct at 8.4 
MMCFD/unit, then we are looking at 17 MMCFD for two LM6000 units.  This puts 
us at utilizing from 39 MMCFD to 42 MMCFD of a system that has between 40-44 
MMCFD total capacity.  This is way too close for comfort, we need to tighten 
both our LM6000 fuel numbers, our system capacity numbers and the LDC load 
numbers.  You need to get confirmation on what the maximum fuel rate will be 
for two of these units.  I need to get with Jackson Utility to see if their 
peak hour numbers are different from the daily numbers, I'm betting that they 
are.  I need to build a more detailed model of the two 8" pipelines with the 
LDC loads coming off at the right mileposts, with correct efficiency factors 
for the pipe.  I'll get the correct efficiency factors for the pipe by 
simulating an actual flow period on their system.  I'm hoping that they have 
good historical numbers or are willing to gather data on a typical day for me 
to simulate.  I can take my simulation package up to Tennessee and fine tune 
everything, if needed, or do it here in Houston with email and phone.